|
Volume : II, Issue : VII, August - 2012 Design, Modeling And Analysis Of Helical Gear Boddu Anil Kumar, T.N Charyulu DOI : 10.9780/22307850, Published By : Laxmi Book Publication Abstract : The objective of this paper is to design a helical gear for marine applications by using
empirical formulas. A 2D drawing is drafted from the calculations and a 3D model is
designed using 3D modeling software Pro/Engineer. Structural analysis and thermal
analysis are done using two materials Nickel Chromium Alloy steel and Aluminum Alloy
A360. Structural analysis is done to validate the strength and thermal analysis is done to
validate the thermal properties like nodal temperature, thermal gradient and thermal
flux. Keywords : Article : Cite This Article : Boddu Anil Kumar, T.N Charyulu , (2012). Design, Modeling And Analysis Of Helical Gear. Indian Streams Research Journal, Vol. II, Issue. VII, DOI : 10.9780/22307850, http://oldisrj.lbp.world/UploadedData/1258.pdf References : - Emmanuel RIGAUD, Ecole Centrale de Lyon., 1999,”Modelling and analysis of Static Transmission Erroreffect of wheel body deformation and interactions between adjacent loaded teeth
- R.E. Sanders, Technology Innovation in aluminum Products, The Journal of the Minerals, ,53.2:21-25 2001.
- Groman, M.B. “The Zones of Involute Mesh,” Vestnik Mashinostroeniya, 1962, Issue 12, pp. 12–17 (in Russian).
- Vulgakov, E.B. Theory of Involute Gears,Mashinostroenie, Moscow, 1995 (in Russian).
- Colbourne, J.R. The Geometry of Involute Gears, Springer-Verlag, New York, 1987.
- ANSI/AGMA 1006-A97, “Tooth Proportions for Plastic Gears,” Appendix F “Generating Gear Geometry Without Racks,” AGMA, Alexandria, VA, 1997.
- Kleiss, R.E., A.L. Kapelevich, and N.J. Kleiss. New Opportunities with Molded Gears, AGMA Fall Technical Meeting, Detroit, October 3–5, 2001, (01FTM9)
- Vulgakov, E.B. and A.L. Kapelevicich. “Expanding the range of involute helical gearing,” Vestnik Mashinostroeniya, 1982, Issue 3, pp. 12–14 (in Russian). Translated to English, Soviet Engineering Research, Vol. 2,Issue 3, 1982, pp. 8–9.
- Kapelevich, A.L. “Geometry and design of involute spur gears with asymmetric teeth,” Mechanism and Machine Theory, 2000, Issue 35, pp. 117–130.
|
Article Post Production
Article Indexed In
|